Linea 2000 DOMO DO7298S Manual De Instrucciones página 87

USING THE ROBOT VACUUM WITH THE APP
Click the appliance to open the app's control interface.
This has an extensive menu of functionalities, such as:
· Mapping a space or room. To do this, let the robot vacuum clean the space for the first time. You will
see in the app that the robot immediately starts scanning the space and displaying its results. The
space will be completely mapped at the end of the cleaning through a combination of laser scanning
and cleaning. The app will automatically divide the mapped space into different rooms.
· Reorganising the mapped space. You can rename, merge, divide the proposed rooms, etc. You can also
set up no-go zones and draw virtual walls so the robot will not clean in certain places. The robot will
not enter no-go zones or move past a virtual wall.
· Mapping out your entire house. You can map different spaces (e.g. ground floor, upper floor). To do
this, move the robot with its charging/emptying station to the new space and start with a new room.
Always save the map in "Folder Management". The different maps can be found and used here. Make
sure you always return the charging/emptying station or the optional charging station (DO7296S-32)
to the same place when using a saved map. The location of the charging/emptying station is displayed
on the map using a green symbol.
www.domo-elektro.be
87
DO7298S