Linea 2000 DOMO DO7298S Manual De Instrucciones página 90

4. Remove the nylon pre-filter.
1
5. Remove the dust collector lid, the HEPA filter and the pre-filter sponge.
6. Rinse the canister, the filter holder and the nylon pre-filter under running water. Let them dry before
putting them back in place.
5
7. Use the cleaning brush to clean the HEPA filter and pre-filter sponge.
· If the HEPA filter and pre-filter sponge are dirty, after about 30 days of use, you can also clean them
under running water. •
· The HEPA filter and pre-filter sponge must be replaced after frequent use. The maximum service
life of the filter is approximately 6 months.
8. Allow all the parts to dry fully before putting them back in the appliance.
9. Place the HEPA filter and pre-filter sponge back in the dust collector lid. Place the pre-filter back in the
dust collector. Close the dust container and place it back in the robot.
CLEANING THE WATER TANK
1. Press the release catch to remove the water tank.
2. Remove all dust from the dust container.
3. Remove the mop from the tank.
4. Wash the mop in warm water with a mild detergent. Allow the mop to dry completely.
5. Rinse the reservoir and dust container with warm water and allow it to dry completely.
6. Wipe the outside clean with a soft cloth.
90
DO7298S
3
Allow both to dry fully before putting them back in place.
4
6