Flex IW 1/2' 400 18-EC Instrucciones De Funcionamiento Originales página 14

However, if the tool is used for different
applications, with different cutting accessories
or poorly maintained, the vibration emission
level may differ.
This may significantly increase the exposure
level over the total working period.
To make an accurate estimation of the vibration
exposure level, it is also necessary to take into
account the times when the tool is switched off
or running but not actually in use.
This may significantly decrease the exposure
level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration
such as: maintain the tool and the cutting
accessories, keep the hands warm, organization
of work patterns.
WARNING!
The vibration and noise emissions during
actual use of the power tool can differ from
the declared value in which the tool is used;
In order to protect the operator, user should
wear gloves and ear protectors in the actual
conditions of use.
CAUTION!
Wear ear defenders at a sound pressure
above 85 dB(A).
Technical data
Tool
Type
Rated voltage Vdc 18
No-load speed /min 2700
Max. impact
bpm 3750
rate
Max torque Nm 406
Weight
according
to"EPTA
Procedure
kg
01/2003"
(without
battery)
18V AP 18.0/2.5
Battery
14
IW 1/2" 400 18-EC
Impact Wrench
1.17
AP 18.0/5.0
AP 18.0/8.0
Weight of
kg
battery
Working
-10-40℃
temperature
Storage
< 50℃
temperature
Charging
4-40℃
temperature
Charger CA 10.8/18.0, CA 18.0-LD
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1 1/2" Square drive
2 Variable-speed trigger switch
3 Speed control panel
4 LED light
5 Direction preselector switch (forward /
center-lock /reverse)
6 Strap fixing
For attaching a wrist strap (not included)
in order to reduce the chances of
dropping your tool.
7 Belt clip
8 Opening
9 Fastening screw
Operating instructions
WARNING!
Remove the battery before carrying out any
work on the power tool.
Before switching on the power
tool
Unpack the cordless impact wrench and check
that here are no missing or damaged parts.
NOTE
The batteries are not fully charged on
delivery. Prior to initial operation, charge the
batteries fully. Refer to the charger operating
manual.
IW 1/2" 400 18-EC
0.4
AP 18.0/2.5
AP 18.0/5.0 0.7
AP 18.0/8.0
1.1