Publicidad
Idiomas disponibles
Idiomas disponibles
GARAGE INFLATOR
FOR INFLATABLES
1. Choose the right adapter and attach it to the connector (Fig. 4).
Close the lever on the universal connector.
2. For reference and recommendation purposes only, check our typical air pressure table.
Do not forget to consult the user manual for the item you are inflating to know the exact
and recommended pressure.
3. Attach the nozzle and insert the universal connector (Fig. 5).
4. Connect the power cord and start the inflator.
5. When the desired pressure is reached, stop the inflator and disconnect the power cord.
6. Remove the adaptor from the item you are inflating and remove the adaptor from the
connector.
Fig. 4
1
2
Fig. 5
REPAIRS
1. Before plugging in the inflator, check the power cord for any possible damage. Only
a qualified technician from the manufacturer or distributor can replace the power cord.
2. Any improper use of the device by the user voids the warranty offered by the distributor.
1. Fine / wide nozzle for inflatables
(armbands, wheels and beach lilos)
2. Needle nozzle for balls
3. Universal valve connector (open / close)
3
44
Publicidad
