CST/BERGER AL Serie Manual De Instrucciones página 16

Ocultar thumbs Ver también para AL Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
Model ALGR
The display shows "X TOO STEEP or Y TOO STEEP" Turn the instrument OFF, move the instrument
to a more level position, then turn the instrument on again.
If the instrument continues to produce errors, contact CST/berger-Customer Service.
Spindle Motor Error
Models ALH, ALHV, ALHV-G
If the laser spindle motor fails to rotate or rotates outside of the set speed, an error indicator will
indicate a spindle motor error (Fig. 8). If this occurs, see "Troubleshooting".
Model ALGR
The display shows "Spindle Motor Error".
If the instrument continues to produce errors, contact CST/berger-Customer Service.
Auto Level Mode (Model ALGR)
The Auto Level Mode allows you to control how the instrument reacts when moved out of level.
Model ALGR
Auto Level Mode can be ON, OFF, or ADS. If Auto Level Mode is
set to ON, the instrument will
re-level if the instrument is moved out of level.
If Auto Level Mode is set to OFF, the instrument will NOT re-level
if the instrument is moved out of level, and will continue to
operate; use this option when using an adapter or mount that
allows you to tilt the instrument to create a diagonal laser line.
Use the left SELECT button to turn the Auto Level option ON or
OFF. You may also put the level into ADS Mode ( see Anti-Drift
System- ADS).
Anti-Drift System – ADS ( All Models )
The Anti-Drift System, when ON, will signal to the operator that the instrument has been moved out
of level.The laser head will stop rotating, and the beam and ADS LED will blink in the models ALH,
ALHV; in the model ALGR the display will show "CONT UNIT UNLEVEL".
Models ALHV, ALHV-G, and ALH
The default setting for ADS is user selectable. The default setting may be set to ADS ON or ADS
OFF. When the instrument is OFF, press and hold the (B) button, and then press the (A) button. Once
the instrument is on, turn the instrument off for 15 sec and then back on. If ADS was ON (OFF), it
will now be OFF (ON).
16 • AL-SERIES
SELECT
AUTOLEVEL
ON
AUTOLEVEL
OFF
AUTOLEVEL
ADS
AUTOLEVEL

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

AlhAlhvAlhv-gAlgr

Tabla de contenido