Wall Mounting Or Pole Mounting - Bosch BPT-S 3 Instrucciones De Servicio

46 | Transportation and installation
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
4.5

Wall mounting or pole mounting

Materials required
String inverter (included in delivery)

 Wall bracket (included in delivery)
Suitable drill and drill bit

Screws and wall plugs for securing on the wall

Suitable tool for screw mounting

The device can be mounted on a wall or on a pole.
Pole in this instance refers to a pillar (e.g. made of
steel or aluminium), i.e. a vertical, load-carrying
component of a photovoltaic system.
Prerequisites
 Installation instructions have been followed
Make sure that no devices that generate warm

exhaust air are installed above or below the device.
As the device is not supplied with screws:

– Select screws and wall plugs that are suitable for
the wall material
– Use screws made of steel or stainless steel
– Observe the dimensions of the screw/washer (see
drawing)
English
Bosch Power Tec GmbH