Commissioning; Switching On The Ac And Dc Network - Bosch BPT-S 3 Instrucciones De Servicio

English
NOTICE
NOTICE
Bosch Power Tec GmbH
6

Commissioning

Material damage due to incorrectly set values
during commissioning/recommissioning
During commissioning/recommissioning, parameters
can be changed (e.g. country standard, grid
standard). Incorrect settings can lead to parameters
that exceed the values permitted for the country in
question and which can damage the device. In
addition, the device may no longer be compliant with
the grid or the law.
Settings or changes to parameters may only be

carried out by an authorised electrician
Material damage due to mechanical damage to the
display screen
Knocking or banging the black display screen can
damage the printed circuit board behind it.
 Only operate the device contact-free as described
(e.Key, e.Data, manually via gesture control)
Prerequisites
Corresponding regulations and warnings observed

Device mounted (Wall mounting or pole mounting,

p. 46)
Network cable (AC) connected (Connecting the

network cable (AC cable), p. 65)
Solar generator cable (DC) connected (Connecting

the solar generator cable (DC cable), p. 71)
6.1 Switching on the AC and DC
network
▶
Procedure
1. Switch on the mains power supply by switching
the external circuit breaker
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Commissioning | 83