Dimensions; Manual Operation; Changing Side - Erreka KUBAR 3 Manual Del Instalador

INSTALLATION
4

DIMENSIONS

KUBAR 3 - KUBAR 6 - KUBAR 4 PACM
5

MANUAL OPERATION

6

CHANGING SIDE

34
Installation Guide
KUBAR 8

Dimensions in mm
If necessary the barrier can be operated manually:
1 Turn the key (1) and open the cover (2).
2 Insert the crank (3) in the operator shaft (4) and turn
in the required direction.
3 When finished, return the crank to the support (5).
4 Close the cover and turn the key.

Motorised operation is not possible when the cover
(2) is open, since the safety switch (6) prevents it.
Proceed as follows to change the arm side:
1 Remove the cap (1).
2 Dismount the support (2) and mount it on the other
side.
O
Tighten the screw (3) with a torque of 20 Kg-m.
3 Place the cap (1) on the free orifice.