Publicidad
Idiomas disponibles
Idiomas disponibles
INOXPAN S.L.
3.6. SET AND SECURE THE UNIT TO THE FURNITURE
3.6.1
Only for models UNDER A WORKTOP
3.6.2
ANTI-TIP BRACKET INSTALLATION
To reduce the risk of tipping the unit by abnormal usage or improper loading, the appliance must
be secured by properly installing the anti-tip device (if your model supplied with it) packed with
the appliance.
• Place the anti-tip bracket on the floor as shown in the figure. An anti-tip bracket can be
installed at the left side.
• Mark the locations of the 4 holes of the anti-tip bracket on the floor.
• Use an 8mm / 5/16" masonry drill bit and insert plastic anchors.
• Secure bracket to floor using screws.
• Slide appliance into position and make sure the leg engages the anti-tip bracket.
NOTE: If the unit is relocated, the bracket must be removed and installed in the new location.
:
Open the two caps of the body of the appliance
on the opposite side of the hinge and secure
the appliance in the niche by tightening the
screws through the mounting bracket.
:
115
BEVERAGE COOLER
Publicidad
