Pando integralCooking 10258 Manual De Uso E Instalación página 120

INOXPAN S.L.
5. USE AND HANDLING
USE AND OPERATION
5.1.
5.1.1. CONTROL PANEL
Pando
ON - To turn the refrigerator off, gently touch the key and hold it down for 5 seconds until it
turns off. To turn the refrigerator on, gently touch and hold the key for 1 second until the
temperature indicator lights up.
SELECTOR - Set the temperature to be displayed in degrees Fahrenheit or degrees Celsius.
LIGHT - Used to turn on/off the internal light.
RISE - Used to increase the set temperature by 1°C/1°F.
LOWER - Used to lower the set temperature by 1°C/1°F.
SET SELECTOR - Selects the temperature and humidity to be set.
5.1.2. SYMBOLS ON THE SCREEN
Display of the temperature or error code
The compressor is on.
The heater is on.
Defrost mode.
DynaClima mode.
Eco Demo mode.
Interior light is in display mode. Warning
Audible tone signal
Child lock is activated
Wifi connection signal
Anti-condensation mode
Relative humidity display
5.1.3. FIRST IGNITION
When the unit i s first plugged in, it will automatically switch on at the default settings. The factory
preset temperature is 12°C (54°F).
1. Touch the selector ofsetting
then use the UP and DOWN keys to set the desired indoor temperature. When you
touch either key for the first time, the display will show the last previously set
temperature.
2. The temperature will increase by 1°C/1°F if you touch the UP key once, or the
temperature will decrease by 1°C/1°F if you touch the DOWN key once. The display
flashes while making the adjustment.
C F
until the temperature you want to set flashes. You can
120
BEVERAGE COOLER