Alarm Setting - La Crosse Technology 53147130 Manual De Instrucciones

4. The City code will start flashing. Use the + key or MIN/MAX key to select the City. Keep holding the key
allows the value to advance faster.
5. Confirm with the SUN key, or exit the setting mode by pressing the SET key or ALARM key without
saving the changes.
6. The city's sunrise, sun duration and sunset time will be displayed in a few seconds.
Sunrise
icon
Sunrise
time
7. Press the SUN key twice to go back to normal date display.
DISPLAY OF SUN DURATION TIME
In normal date mode, press the SUN key twice to display the sun duration time (total number of hours of
1.
sunlight on the day).
Press the SUN key again will display the City selected (see "LOCATION SETTING FOR
2.
SUNRISE/SUNSET TIME").
Press the SUN key again to go back to normal date display.
3.

ALARM SETTING

To set the daily alarm:
1. Press and hold ALARM key for 3 seconds until the alarm time shown.
Alarm time
(flashing)
2. The hour digit will be flashing. Press the + key or MIN/MAX key to adjust the hour.
3. Press ALARM key once and minute digit will be flashing.
4.
Press ALARM key once to confirm the setting, or exit the setting mode by pressing the SET or SUN key.
Note: To activate/deactivate the alarm function, press the ALARM key once. The display of the alarm icon ((()))
represents that the alarm is "ON".
Note: The duration of alarm sounding is 2 minutes. Press any key will stop the alarm sound.
City Code
(flashing)
Sunset
Sun duration
(hours : minutes)
Press the + key or MIN/MAX key to adjust the minute.
23
Sunset
icon
time
Alarm On indicator