Technical Data; Dimensions, Weights, Ambient Conditions; Supply Voltage (External); Control Signals - Balluff BTL5-P/I/K/L/M-M-P-S32/KA Serie Manual De Instrucciones

BTL5-P/I/K/L/M_-M_ _ _ _-P-S32/KA_ _
Micropulse Linear Transducer in Profile Housing
7

Technical Data

The following are typical values at DC 24 V and 25 °C. Fully operational after power-up, with full accuracy after warm-
up. Values are with BTL5-P-3800-2, BTL5-P-4500-1 or BTL5-P-5500-2 magnet held at a constant offset from the
transducer or with captive magnet BTL5-F/M/N-2814-1S (see magnet section for exceptions):
Resolution
Hysteresis
Repeatability
(resolution + hysteresis)
System resolution is determined
by the processor or external con-
troller.
Recommended sampling rate:
Nominal length f
Standard
< 1000 mm 0.5 to 2 kHz
< 2000 mm 0.5 to 1 kHz
> 2000 mm 0.5 kHz
Non-linearity:
Nom. length < 500 mm > 500 mm
±100 µm ±0.02 % FS
Temperature coefficient
< (6 µm + 5 ppm * nominal length)/K
Shock loading 100 g/6 ms
1
per IEC 60068-2-27
Continuous shock 100 g/2 ms
1
per IEC 60068-2-29
Vibration 12 g, 10 to 2000 Hz
per IEC 60068-2-6 1
1
Individual specifications as per
Balluff factory standard
7.1 Dimensions, weights,
ambient conditions
Nominal length < 4000 mm
➥ ➥ ➥ ➥ ➥ pages 4 and 5
Dimensions
Weight approx. 1.4 kg/m
Housing anodized aluminum
Housing attachment
Mounting clamps with isolation
bushings and screws
Operating temp. –40 °C to +85 °C
Humidity < 90%, non-condensing
Protection class per IEC 60529 IP
67 when closed up
7.2

Supply voltage (external)

Regulated supply voltage
BTL5-_1... DC 20 to 28 V
Ripple < 0.5 V
pp
BTL5-_2... DC ±14.7 to ±15.3 V
Current draw < 90 mA (at 1 kHz)
Inrush < 3 A/0.5 ms
Polarity reversal protection built-in
Overvoltage protection
Transzorb diodes
Electric strength
GND to housing 500 V
8
english
< 2 µm 7.3

Control signals

< 4 µm
INIT pulse
< 6 µm
Level
Length
7.4

Connection to processor

Shielded cable,
max. length 500 m, Ø 6 to 8 mm.
7.5

Included in shipment

Transducer
or
(with mounting brackets, isolation
bushings and screws, not incl. mag-
net)
7.6 Magnets
(order separately)
Spacing, offset and installation
Operating temp. –40 °C to +85 °C
BTL5-P-3800-2
Weight
Housing
BTL5-P-5500-2
Weight
Housing
Non-linearity:
Nom. length < 500 mm > 500 mm
BTL5-P-4500-1
Weight
Housing
Operating temp. –40 °C to +60 °C
BTL5-F-2814-1S
Weight
Housing
BTL5-M-2814-1S ➥ ➥ ➥ ➥ ➥ Fig. 3-7
Weight
Housing
Contact surface
BTL5-N-2814-1S
Weight
Housing
Contact surface
Control arm (optional)
BTL2-GS10-_ _ _ _-A
Aluminum, dimensions ➥ ➥ ➥ ➥ ➥ Fig. 3-8
Various standard lengths LG avail-
able (please specify when order-
ing)
+5 V RS 485/422 driver
1 µs (max. 3 µs)
➥ ➥ ➥ ➥ ➥ Fig. 3-1
➥ ➥ ➥ ➥ ➥ Fig. 3-5
➥ ➥ ➥ ➥ ➥ pages 4 and 5
➥ ➥ ➥ ➥ ➥ Fig. 3-2
approx. 12 g
plastic
➥ ➥ ➥ ➥ ➥ Fig. 3-3
approx. 40 g
plastic
±150 µm ±0.03 % FS
➥ ➥ ➥ ➥ ➥ Fig. 3-4
approx. 90 g
plastic
➥ ➥ ➥ ➥ ➥ Fig. 3-6
approx. 28 g
plastic
approx. 32 g
anodized aluminum
plastic
➥ ➥ ➥ ➥ ➥ Fig. 3-7
approx. 35 g
anodized aluminum
plastic
7.7

Accessories (optional)

➥ ➥ ➥ ➥ ➥ Fig. 4-1
Connectors
7.8 Compatible processors and
displays
... for BTL5-P1
Analog output processor cards:
BTM-A/E1 multi-channel processor
with 1 to 4 DC analog outputs
Digital output processor cards:
BTM-H11-240/340 with 23-bit par-
allel and BCD, Gray/binary or
SSD, Gray
Displays:
BDD-AM10-1-P display and con-
troller with 2 relay outputs
BDD-CC08-1-P display with 8
switching outputs