Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature setting
• Each time the temperature setting button A is pressed once,the temperature
setting changes one time. After the temperature setting has been completed,
the refrigerator will run according to the set value after 30s.
The shift regulation is:
LED1
Super freeze mode
• Long press temperature setting button for 6s, it will enter Super freeze mode
after 30s,and LED3 and LED4 turn on at the same time.
• After running for 40 hours at Super freeze mode or the setting button is
pressed,it will quit the Super freeze mode,then go back to the previous setting.
• It is suggested to turn on super freeze mode for 12 hours before placing large
amount of frozen food in freezer compartment at one time.
Super cool mode
• Long press temperature setting button for 3s, it will enter Super cool mode
after 30s,and LED1 and LED2 turn on at the same time.
• After running for 6 hours at Super cool mode or the setting button is pressed,it
will quit the Super cool mode,then go back to the previous setting.
Standby mode
• Press and hold the setting button for 10s, all LEDs on the control panel will turn
off, and the Standby mode will be activated after 30 seconds. Once in standby
mode, press the setting button again to turn on all LEDs and exit the mode.
• The Refrigerator stops working and lamp turns off automatically in the stanby
mode.
ATTENTION
The Super freeze function is designed to maintain the nutritional value of the food in the
freezer. It can freeze the food in the shortest time. If a large amount of food is frozen at one
time, it is recommended that the user turn on the Super freeze function and put the food in.
At this time, the freezing speed of the freezer compartment is increased, which can quickly
freeze the food, effectively lock the nutrition of the food, and facilitate storage.
LED3
LED2
EN-43
LED4
Publicidad
