AIPTEK P800 Manual Del Usuario página 6

User's Manual
Getting Started
Charging the product
The device is built-in a 36000mAH Li-on battery for mobile use. Please
charge the device for at least 4 hours prior to its first use. Connect one end
of the supplied power adapter bundled, into the DC IN jack and the other
end to a power outlet to initiate charging.
Turn On/Off the device
Press the power button for 3 seconds to power on the device. After
booting, the screen will display the desktop of Android OS.
Press power button for 2 seconds and the screen will display the power
selection menu. Choose "Power off" to shut down the device.
Turn On the projector
When the device is powered on, press the Projector On/off switch
turn on projector. Push the button again to deactivate the tablet display and
just use the projection. A third press will turn off the projector and return to
tablet screen.
Adjusting the Focus
Place the projector on a flat surface and
the lens toward a wall or a projection
screen. Adjust the focus by spinning the
focus ring to achieve a sharp and clear
picture at its projection distance.
P800 can project clearly from 50
to 319cm (20" ~ 125") distance and projection size from 51 to
305cm (20" ~ 120")
6
to