Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
thoroughly. Replace the filter if it is too dusty and the
EN
grinding disc if it is worn out.
5. Reassemble the filter, fixing ring, grinding disc and cover
after cleaning. Please note, that all parts need to be
completely dry before reassembling.
You can purchase new grinding discs and filters on
our website at www.silkn.com or www.silkn.ca.
4 Storage
All parts must be completely dry before being stored.
• Store all parts in a clean and dry place, avoiding heat
and direct sunlight.
• Attach the cover
for storage.
5 Troubleshooting
Some problems may be caused by minor faults that you can
fix yourself. To do so, follow the instructions in the following
table. If it is still not possible to resolve the problem, contact
customer service. Do not repair the product yourself.
Fault
The product
does not start.
The product
does not
charge.
13
to protect the grinding disc
3
Possible cause and solution
Make sure the product is properly
charged.
Make sure the USB cable
connected to the charging port
USB power source.
4
is securely
11
and the
2
Publicidad
Tabla de contenido
