Publicidad
Enlaces rápidos
Anchor Point™ Single-Handle 1-Spray Tub and
Shower Faucet in Chrome, 1.8 GPM
Grifo para bañera y ducha Anchor Point™,
con 1 rociador y una manija, cromo, 1.8 GPM
Exclusively Distributed By:
HD Supply
Atlanta, GA 30339
© 2022
1
Part #:
211726
USN #: 3552559
Mfg #: 832X-1201
To Reorder:
1-800-431-3000
hdsupplysolutions.com
Publicidad
Manuales relacionados para Seasons Anchor Point 832X-1201
Resumen de contenidos para Seasons Anchor Point 832X-1201
- Página 1 Part #: 211726 USN #: 3552559 Mfg #: 832X-1201 Anchor Point™ Single-Handle 1-Spray Tub and Shower Faucet in Chrome, 1.8 GPM Grifo para bañera y ducha Anchor Point™, con 1 rociador y una manija, cromo, 1.8 GPM To Reorder: Exclusively Distributed By: 1-800-431-3000 HD Supply hdsupplysolutions.com...
- Página 2 Preparation / Preparación Before beginning the assembly of this product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Antes de comenzar el ensamblaje del producto, asegúrese de tener todas las piezas.
- Página 3 Assembly Instructions / Instrucciones de Ensamblaje Preparing for Installation: Fasten the body assembly (1) to crass brace with mounting screws Shut off the water supply to the tub and shower. Verify that the hole (2, not included). sizes and positions of the holes in the wall are correct: NOTE: Be sure to position the body (1) correctly in the wall with the a.
- Página 4 Assembly Instructions / Instrucciones de Ensamblaje Shower-Only Outlet Connections: Flushing: Wrap thread sealant tape around the pipe threads in a clockwise Place the handle (E) on the valve body connector (1) and turn the direction as shown. Connect the hot and cold water supply lines handle (E) to the full “on”...
- Página 5 Assembly Instructions / Instrucciones de Ensamblaje Installing the tub spout: Checking for leaks: Wrap thread sealant tape around the pipe threads of the tub spout (J) Place the handle (E) on the valve body (1) and turn the handle to the outlet in a clockwise direction as shown.
- Página 6 Care and Cleaning / Cuidado y Limpieza To clean, wipe down with a damp cloth and dry with a towel. □ Para limpiar, usa un paño húmedo y seca con una toalla. □ Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will be voided. □...