SET UP & USE
OSCILLATION
AUTO ECO THERMOSTAT
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug the unit directly into a 120V AC
electrical outlet.
NOTE: Only operate heater in upright position.
1. FAN: Press the ON/OFF
the fan or heater, press the
mode.
2. HEAT MODE: When the fan is ON, press the HEAT
setting. One press for Low Heat (1000W) or twice for High Heat (1500W).
3. SLEEP TIMER: Automatically shuts the unit OFF after the desired amount of time
has passed. Press the SLEEP TIMER
The timer can be set up to 24 hours. "00" on display turns off the Timer. Press the
UP
and DOWN
again to set timer.
4. OSCILLATION: Press the OSCILLATION
Press
button again to turn off feature.
5. THERMOSTAT: A thermostat / constant temperature feature is included to
maintain the desired temperature setting when in use
Pressing the
turn on the Thermostat function.
To set the room to a specific temperature, press the
temperature. The temperature will be flashing on the display. It will now maintain
the desired temperature.
To de-activate this function, turn the unit off or press the Heat Mode button
NOTE: The heater will automatically run on LOW or HIGH heat depending on the
the ambient temperature and the set temperature. When the ambient temperature
and set temperature is greater than 2°, it will operate on a HIGH heat setting.
When the ambient temperature and set temperature is less than 4°, it will operate
on a LOW heat setting. When the difference between the ambient temperature
and the set temperature is greater than 4°, the FAN ONLY setting will operate.
Page 8
TIMER
BUTTON (-)
button, the fan will automatically turn on. To turn off
button again with a single click to enter standby
buttons to set desired time. Press SLEEP TIMER
or
button on the unit while in any heater function or speed will
DIGITAL DISPLAY
HEAT
AUTO ECO THERMOSTAT
BUTTON (+)
button to desired heat
button to initiate Timer function. NOTE:
button to enter the oscillation function.
or
POWER
button
.
button to the desired
.