Publicidad
Idiomas disponibles
Idiomas disponibles
• Use a special cleaner suitable for the
surface of the hob.
Stainless steel
• Wash stainless steel parts with water, and
then dry them with a soft cloth.
• To remove burnt food, fat and stubborn
stains let them soak in a small amount of
mild detergent for a few minutes before
cleaning.
• Use cleaning products designed
specifically for cleaning stainless steel in
order to protect the steel surfaces.
• Do not use cleaning products containing
corrosive chemicals such as chlorides, do
not clean the surface with disinfectants,
stain or rust removers and immersion
cleaners.
7.2 Pan supports
The pan supports are not resistant to
washing in a dishwasher. They must be
washed by hand.
1. Remove the pan supports to easily clean
the hob.
Be very careful when you replace the
pan supports to prevent the hob top
from damage.
2. The enamel coating occasionally can
have rough edges, so be careful when
you wash the pan supports by hand and
dry them. If necessary, remove stubborn
stains with a paste cleaner.
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
14
ENGLISH
3. After you clean the pan supports, make
sure that they are in correct positions.
4. For the burner to operate correctly, make
sure that the arms of the pan supports
are aligned with the centre of the burner.
7.3 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage to
the hob. Take care to avoid burns.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration. Clean
the hob with a moist cloth and a non-
abrasive detergent. After cleaning, wipe
the hob dry with a soft cloth.
• To clean the enamelled parts, caps and
crowns, wash them with warm soapy
water and dry them carefully before you
put them back on.
7.4 Cleaning the spark plug
This feature is obtained through a ceramic
ignition candle with a metal electrode. Keep
these components well clean to prevent
difficult lighting and check that the burner
crown holes are not obstructed.
7.5 Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the conditions of
the gas supply pipe and the pressure
adjuster, if fitted.
Publicidad
