Descargar Imprimir esta página

Electrolux KGS6404SX Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

use abrasive products, abrasive cleaning
pads, solvents or metal objects.
• Do not clean the burners in the
dishwasher.
2.6 Service
• To repair the appliance contact the
Authorised Service Centre. Use original
spare parts only.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate. The
rating plate is on the bottom of the hob.
Model .......................................
PNC .........................................
Serial number ...........................
3.2 Gas Connection
WARNING!
The following instructions about
installation, maintenance and ventilation
must be carried out by qualified
personnel in compliance with the
regulation in force (UNI-CIG 7129 -
7131). Make sure that the kitchen is well
ventilated: keep natural ventilation holes
open (at least 100 cm²) or install a
mechanical extractor hood.
Choose fixed connections or use a flexible
pipe in stainless steel in compliance with the
regulation in force. If you use flexible metallic
pipes, be careful they do not come in touch
with mobile parts or they are not squeezed.
Also be careful when the hob is put together
with an oven.
• Contact your municipal authority for
information on how to dispose of the
appliance.
• Disconnect the appliance from the mains
supply.
• Cut off the mains electrical cable close to
the appliance and dispose of it.
• Flat the external gas pipes.
Make sure that the gas supply pressure
of the appliance obeys the recommended
values.
If the supplied pressure has not the specified
value, it is necessary to assemble a proper
pressure regulator in compliance with the
standard UNI EN 88. For Liquid Gas (LPG)
the use of pressure regulator is allowed only
if they are in compliance with UNI EN 12864.
The adjustable connection is fixed to the
comprehensive ramp by means of a threaded
nut G 1/2". Screw the parts without force,
adjust the connection in the necessary
direction and tighten everything.
A
A. End of shaft with nut
B. Washer supplied with the appliance
C. Elbow supplied with the appliance
B C
ENGLISH
7

Publicidad

loading