Cembre SD-36B Manual De Uso Y Mantenimiento página 17

5.2.2) Using the drilling machine with the support trolley
Insert the handle (6) of the drilling machine into the housing (22) of the trolley (Ref. to Fig. 9).
Using the main handle of the drilling machine, move the trolley over the sleeper to the desired
hole position, locate the TPM guard nozzle into the hole of the baseplate (Ref. to Fig. 10) and
proceed as § 5.3.
Note: For use of the support trolley, refer to specific "Operation and Maintenance Manual".
5.3) Drilling Operation
Press the ON/OFF button (7) to switch on the drill.
Firmly grip the drilling machine and press the start button (18) to start the motor.
Apply a slight starting pressure on the machine, so that the auger tip catches and starts drilling the
wood with automatic advancement, without additional force from the operator.
During the operating cycle it is possible to check the current revolutions
of the spindle via the OLED display and the spindle rotation direction.
When the preset drilling depth is reached, the adjustment collar prevents
any further advancement and the return springs will automatically retract
the machine.
Release the start button (18).
A
To optimise battery charge and for safety reasons, if drilling operations continue
for more than 120 seconds, the motor automatically stops.
To re-start it, it is sufficient to operate the ON/OFF button.
max.120 s
5.4) Reverse rotation
B
If the auger is blocked in the wooden sleeper, set the machine to reverse rotation to disengage
the auger.
View the reference screen on the display, keep your finger on the capacitive button to move
the cursor under the chosen direction of rotation, defined on the display right side.
C
- right rotation
- lef trotation for reverse rotation.
Firmly grip the drilling machine, press the start button (18) and disengage the auger.
17
MENU'
SD-36B
S/N 24AX02
FW S1K848..
100
SD-36B
10 h 25 m
MENU'
Lorem ipsum
SD-36B
A S/N 24AX02
FW S1K848..
100
SD-36B
B
10 h 25 m
C
for drilling operation
durante il funzionamento
188 188
rpm rpm
Lorem ipsum
SD-36B
Lorem ipsum
S/N 24AX02
FW S1K848..
100
SD-36B
Lorem ipsum
S/N 24AX02
FW S1K848..
100
SD-36B
Lorem ipsum
S/N 24AX02
FW S1K848..
100
SD-36B
Lorem ipsum
S/N 24AX02
FW S1K848..
100
SD-36B
Lorem ipsum
!
S/N 24AX02
FW S1K848..
2 sec 003
100
Errori
SD-36B
Lorem ipsum
S/N 24AX02
FW S1K848..
DRIVER
100
SD-36B
Lorem ipsum
S/N 24AX02
FW S1K848..
MOTOR
100
SD-36B
A Lorem ipsum
S/N 24AX02
FW S1K848..
MOTOR
100
SD-36B
NTC
S/N 24AX02
FW S1K848..
FAULT
100
SD-36B
S/N 24AX02
FW S1K848..
100
(Ref. to Fig. 9 - 10).
188
rpm
188
rpm