Cembre SD-36B Manual De Uso Y Mantenimiento página 18

5.5) Emergency release
Correct operation of the machine and the safe rapid release of the augers in the event of
an emergency is only guaranteed when using original CEMBRE PV augers.
To rapidly remove the machine during a drilling operation, proceed as follows:
Immediately release the start button (18).
Operate the emergency lever (15) moving it downwards.
Keeping the lever depressed, slightly twist the machine to release the auger. Lift and remove
the machine from the auger.
The navigation menu is shown on the OLED display (12) on
the side of the drill. The capacitive touch button (13) for menu
selection is placed under the display and allows selection of
various screens only when the display is on.
MENU'
6.1) Structure of the "main menu"
SD-36B
A S/N 24AX02
FW S1K848..
100
SD-36B
B
10 h 25 m
C
6.2) Main screen
A or B screens can be set as the "main screen" when the drill is turned on.
. Display the chosen screen and hold finger on the button (13) until
the white line appears.
6. NAVIGATION MENU
Lorem ipsum
Sleeper Drill model
Sleeper Drill Serial Number
Firmware version of the electronic control card.
Number of hours left for routine maintenance
Rotation mode setting
(Factory setting shown)
Sleeper Drill model
Battery charge level.
Total usage time of the machine expressed in hours (h) and min-
utes (m)
Rotation mode setting
MENU'
SD-36B
A S/N 24AX02
FW S1K848..
100
SD-36B
B
10 h 25 m
C
12
13
Lorem ipsum
Spindle rotation direction. Keep your
finger on the capacitive button to move
the cursor
Drilling Revers mode
2 s
18