Designers Fountain STELLANT Instrucciones De Instalación página 10

INSTALLATION (CONTINUED)
7
SECURE THE CANOPY
 Remove one of the canopy
screws (B) from the mounting
bracket (A).
 Align the canopy screw (B) with
the wide part of the keyhole slot
in the canopy (I).
 Rotate the canopy (I) until the
canopy screw (B) is at the
narrow end of the keyhole slot.
 Thread the other canopy screw
(B) through the hole.
 Tighten the canopy screws (B)
until the canopy (I) is secure.
 Align the canopy cover (J)
projections with the cutouts on
the canopy (I) and rotate it a
quarter turn to secure the canopy
cover (J) in place.
8
MOUNT THE BLADES
 The blades (N) come in white finish on one side and wood finish on the
opposite side. Select the desired bade (N) finish and place it face down
when mounting the blades (N) to the blade arm (Q).
 Affix each blade (N) to the blade arm (Q) using a fiber washer (CC) and a
blade screw (DD).
DD
N
10
F
I
E
I
B
J
J
CC
Q