Designers Fountain STELLANT Instrucciones De Instalación página 14

TROUBLESHOOTING
Problem
The fan will
not start.
The fan
sounds noisy.
The fan
wobbles.
Solution
 Check the breaker or the fuses.
 Check the line wire connections to the fan and switch
wire connections in the housing.
 Make sure all motor housing screws are snug.
 Make sure the screws that attach the fan blade to the
motor are tight.
 Make sure the wire nut connections are not rattling
against each other or the interior wall of the switch
housing.
 Allow a 24-hour "breaking in" period. Most noises
associated with a new fan disappear during this time.
 If using the ceiling light kit, make sure the glass shade
is secured tightly.
 Make sure there is a short distance from the ceiling to
the canopy. It should not touch the ceiling.
 Make sure your ceiling box is secure and that rubber
isolator pads are used between the mounting bracket
and outlet box.
 Verify that all blades and blade arm screws are secure
(most fan wobble problems are caused by loose parts.)
Once the fan is properly installed, run the ceiling fan for
10 minutes to let the fan self-adjust.
14