Designers Fountain STELLANT Instrucciones De Instalación página 9

INSTALLATION (CONTINUED)
5
MOUNT THE MOTOR
 Lift the hanger ball (E) up and
through the mounting bracket (A)
opening, and allow the hanger
ball (E) to sit in the bottom of the
mounting bracket (A).
NOTE: The mounting bracket (A) has
a guide near the bottom that
aligns with the groove in the
hanger ball (E).
 Make sure the hanger ball (E)
locks in place with the guide on the
mounting bracket (A).
6
CONNECT THE WIRES
 Ensure the bump in the rear of the
mounting bracket (A) is aligned with
the hanger ball (E) notch.
 Connect the ground supply wire to the
ground mounting bracket wire and
ground wire on the hanger ball (E)
using a wire nut (FF).
 Connect the white supply wire to the
white fixture wire using a wire nut (FF).
 If there is a second hot/power line
coming from the outlet box, connect
the second supply line to the blue
(light power) fixture wire for separate
light and fan control. Otherwise,
connect the black supply wire to the
black fixture wire and the blue fixture
wire using a wire nut (FF).
 Secure each join with electrical tape.
Tuck the wire connections into the
outlet box.
A
9
A
I
J
M
E
A
A
FF
B
I
F