Publicidad
Idiomas disponibles
Idiomas disponibles
Read the notes in the following
booklet carefully as they provide
important
information
safety, use and maintenance.
Keep and do not damage the
instructions
to
reference.
PRODUCT WARNINGS
This appliance is to be used only for
the purpose for which it was expressly
designed, i.e. as a hair dryer. Any
other use, e.g. use on animals or
wigs, is incorrect. Labor Pro accepts
no liability for improper use of the
appliance.
Do not use the appliance, do not
connect or disconnect the power
plug from outlet with wet hands.
Always check that the appliance
is powered by an electrical source
whose voltage corresponds to that
indicated on the label.
Do
not
leave
unattended when plugged in.
Do not wrap the cord around
the main body when storing the
appliance. Do not place heavy
objects on the cable, twist it or crush
it.
Do not use with the cord coiled
around
itself
appliance.
Do not use the appliance if the
power plug moves freely in the
socket.
Insert the plug fully directly into the
socket: do not use extension cords.
Do not use near flammable materials
(such as alcohol, gasoline, thinner,
aerosol sprays, hair care products, or
nail polish removers).
Do not damage, modify, bend, pull,
or kink the cord. Also, do not place
heavy objects on the cord or crush it.
Do not place the appliance in the
8
ENGLISH - TRANSLATION OF THE ORIGINAL INSTRUCTIONS
regarding
allow
for
future
the
appliance
or
around
the
bathroom or in places with high
humidity.
Also, do not place it where it could
dripping water (for example on top
of the washbasin cabinet).
Unplug the appliance from socket by
grasping the plug and not by pulling
on the cable.
Do not immerse the appliance in
water or wash it with water.
Store the appliance in a cool, dry
place away from light and heat
sources.
WARNINGS IN THE EVENT
OF PRODUCT FAILURE OR
MALFUNCTION
In the event of a malfunction or fault,
discontinue use immediately and
remove the power plug; failure to do
so may result in fire, electric shock or
injury.
The appliance is equipped with
a thermal safety system. In the
event of overheating (e.g. due to
an obstructed rear grid), the cold
air mode will be activated. If this
happens, switch off the appliance
and unplug it from the socket.
Let it cool for a few minutes. Before
switching it on again, clean the
motor grille.
If
the
appliance
automatically
overheating, contact the Service
Department.
PREPARATION AND USE
The appliance is equipped with:
- a 3-position switch for adjusting
the motor speed (2);
- a 3-position switch for adjusting
the temperature (3);
- a button for emitting cold air (4)
when the switch (3) is pressed.
The
package
2
differently
switches
as
a
result
also
includes
sized
nozzles
off
of
to
Publicidad
