Qilive Q.5117 Manual De Instrucciones página 11

5.3. GENERAL OPERATION
10
Fig. 10
11
Fig. 11
12
1
2
Fig. 12
Type of flooring
Hard floors, tiles
Carpets
Rugs, mats
Speed control knob
■
Turn the Speed control knob (13) to adjust the suction
power according to the type of surface to be cleaned
(Fig. 10).
– Minimum: For delicate materials, curtains.
– Medium: For furniture, rugs and mattresses.
– Maximum: For tiles, wooden or other hard floors.
Suction power regulator
■ When it is difficult to move the floor brush (17) over the
floor or carpet, you can also adjust the suction power
with the Suction power regulator (8) on the handle of
the suction hose (Fig. 11). Slide the switch up/down to
adjust.
Dual-purpose floor brush
Use the pedal switch (18) on the floor brush to adapt the
1.
head to clean hard floors or carpets.
■
Push down
brushes to clean hard floors.
■
Push down
brushes to clean carpets, rugs or mats.
2. Set the sliding tab to "EASY CLEAN" or "DEEP CLEAN"
to adjust the incoming airflow to a higher or lower grip,
depending on the type of floor surface. Lift the floor
brush before sliding the tab.
Dual-purpose floor brush
Brush setting
Sliding tab setting
(pedal switch)
11
on the pedal switch to extract the
on the pedal switch to retract the
Speed control
EASY CLEAN /
DEEP CLEAN
EASY CLEAN /
DEEP CLEAN
EASY CLEAN
EN
knob setting
Maximum
Medium
Medium