Qilive Q.5117 Manual De Instrucciones página 14

■
Wipe the vacuum cleaner with a soft, dry cloth.
EN
■
Regularly check the vacuum cleaner and accessories for damage or blockages
(→ CLEARING A BLOCKAGE). Remove any debris (dust, hair, lint, foreign
objects, etc.) that may accumulate over time to maintain optimum performance of
your appliance.
WARNING:
■ Never use the vacuum cleaner without the filters and dust bin as this may
damage the appliance.
■ Torn or not properly sealing filters may damage the motor. When a filter is defective,
it must be replaced with a new original one.
6.1. DUST BIN AND PRE-MOTOR FILTERS
Clean the dust bin and pre-motor filters when dusty. Replace the HEPA filter when the
suction power becomes weaker over time.
17
Fig. 17
18
2
Fig. 18
19
Fig. 19
Turn off and unplug the vacuum cleaner.
1.
Remove the dust bin and empty the content first
2.
(→ EMPTYING THE DUST BIN). (Fig. 17).
Pull the 2 plastic tabs in the middle of the HEPA filter
3.
(23) to remove it from the back of the dust bin (Fig. 18).
Then take out the sponge filter (22) from the HEPA filter.
4.
1
Gently tap the HEPA filter (23) over a rubbish bin to
5.
remove excess dust (Fig. 19).
14