Timer
With the timer, you can switch a cooking position off
automatically after a set cooking time.
Setting the cooking time
The hotplate must be selected and the power level set.
Touch the
symbol.
î
1.
lights up in the display.
0
00
h
min
In the next 3 seconds, slide your finger up or down and set
2.
the desired cooking time in minutes.
Safety shut-down
If a cooking position is in use for a long time without the
settings being changed, the safety shut-down is activated.
The cooking position switches off. "Cooking position in use for
too long" appears in the display. Touch the
display goes out. You can make new settings.
When the safety shut-down is activated depends on the power
level which has been set. For more information, see section
Resolving malfunctions.
Select hours. Slide your finger up or down and set the
3.
desired cooking time in hours.
After three seconds, the set cooking time is applied. The
cooking time starts counting down in the display.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
A signal sounds. 00 sec and power level 0 light up in the
hotplate display.
Note: You can set a cooking time of up to 9 hours and
59 minutes. Depending on the power level set, the hotplate
may also switch off before the cooking time has elapsed. See
section Automatic safety switch-off.
To correct the cooking time: touch the
cooking time.
To cancel the cooking time: Touch the
0
h
symbol. The
Ñ
.
00
min
x
symbol and reset the
symbol and reset to
x
25