Publicidad
Idiomas disponibles
Idiomas disponibles
ENG - 16
PROGRAMMING INSTRUCTIONS
There are two programming methods available:
1. Programming by mean the MODE option.
2. Classic programming (2 people)
1. PROGRAMMING BY MEAN THE MODE OPTION
1. Press the menu button
2. Slide the slider-button until you reach the MODE option and press the
same slider-button to access.
3. Press the slider-button again to select a programming code.
4. Enter password 1111 and select continue.
5. Slide the slider-button until you reach the desired value and press it to
confirm your selection.
Note: To know the programming code that have to be assigned to the monitor, count
the buttons on the entrance panel starting with the final module and ending with the
main module with audio unit. The number 1 will be the lower right button, as shown
in the image below.
VIDEODOOR ENTRY SYSTEM MONITOR
18
(End)
16
14
12
10
8
6
4
2
PROGRAMMING CODE
on the monitor.
17
15
13
11
9
7
5
3
(Start)
1
Publicidad
