geberit MAPRESS Manual Del Usuario página 24

EN
• If there are incipient cracks: take the pressing
attachments out of service immediately, label
them as defective and do not use them again.
Avoiding damage to Geberit pressing
attachments caused by faulty pressing
operations
Geberit pressing attachments (pressing jaws,
pressing collars, adapter jaws) can be damaged
by faulty pressing operations or use; for example,
by being pressed by foreign bodies.
• Do not tilt the pressing attachments on the
pressfitting.
• Hook the claws of the adapter jaw into the
pressing collar correctly.
• If you suspect that the pressing attachments are
damaged (for example, if sharp edges appear
on the pressfitting after the pressing procedure),
they must be replaced.
Using personal protective equipment
People can be injured without suitable protective
equipment. Wear a protective helmet, protective
goggles and safety shoes during the pressing
procedure.
24
18014403394694923 © 12-2023
968.751.00.0(01)