geberit MAPRESS Manual Del Usuario página 31

Pressing with Geberit Mapress pressing collars
CAUTION
Danger of cutting due to sharp edges on the Geberit
pressfitting
Defective Geberit pressing collars can cause sharp
edges to form on the Geberit pressfitting.
▶ Only use pressing collars that are in perfect working
order and are maintained.
▶ Check the pressfitting for sharp edges after the
pressing procedure and replace the pressing collar if
necessary.
CAUTION
Danger of crushing
▶ Keep your hands at a safe distance from the Geberit
pressing collar and adapter jaw.
ATTENTION
Damage to the Geberit pressing collar due to a failed
pressing sequence
The Geberit pressing collar can be damaged by a failed pressing
sequence.
▶ Replace the damaged pressing collar and take it out of service.
ATTENTION
Leaking connection due to failed pressing sequence
▶ Have any Geberit pressing collars that have not been closed
completely, as well as the adapter jaw and pressing tool,
inspected by an authorised repair shop.
▶ Replace any connections that have not been pressed
correctly. They must not be pressed again.
18014403394694923 © 12-2023
968.751.00.0(01)
EN
31