JVC KD-ADV5580 Manual De Instrucciones página 38

About sounds reproduced through the
rear terminals
• Through the analog terminals (Speaker
out/LINE OUT):
2-channel signal is emitted. When playing a
multi-channel encoded disc, multi-channel signals
are downmixed. (AUDIO—DOWN MIX: see page
34.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, MPEG
Audio) are emitted through this terminal. (For
more details, see table below.)
To reproduce multi-channel sounds such as Dolby
Digital and MPEG Audio, connect an amplifier or
a decoder compatible with these multi-channel
sources to this terminal, and set "DIGITAL AUDIO
OUTPUT" correctly. (See page 34.)
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the "DIGITAL AUDIO OUTPUT" setting on the setup menu (see page
34).
Playback Disc
DVD-Video 48 kHz, 16/20/24 bits
Linear PCM
96 kHz, Linear PCM
Dolby Digital
MPEG Audio
Audio CD, Video CD
MPEG
MP3/WMA
WAV
* Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the
discs are not copy-protected.
38
On-screen guide icons
During playback, the following guide icons may
appear for a while on the monitor.
DVD: The following icons appear at the beginning of
a scene containing:
DOLBY DIGITAL/
STREAM/PCM
48 kHz, 16 bits stereo Linear PCM *
48 kHz, 16 bits stereo Linear PCM
Dolby Digital bitstream
MPEG bitstream 48 kHz, 16 bits stereo Linear PCM
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
44.1/48 kHz, 16 bits Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits stereo Linear PCM
: Playback
: Pause
: DVD-Video/VCD: Forward slow
motion
: DVD-Video: Reverse slow motion
: Forward search
: Reverse search
: Multi-subtitle languages
: Multi-audio languages
: Multi-angle views
Output Signal
PCM ONLY
PCM
48 kHz, 16 bits
stereo Linear PCM
OFF
OFF