Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
-
2 settings: 300W-600W
-
For rooms up to 7m²
-
With tip-over protection switch
-
IPX0 (do not use in zone 0-1-2 - see drawing)
OPERATION
-
It is normal that when the heaters are turned on for the first time or when they are
turned on after not being used for a long time, the heaters give off some odour
and fumes. This will disappear once the heater has been on for a while.
-
Choose a suitable location for the heater, taking into account the safety
instructions, and plug the heater into a suitable socket.
-
Turn on the heating elements with the switch. There are
two position switches, each controlling 300W, and the
user can reach 600W by turning on two switches. The
machine's switches are designed with a foot pedal.
-
The user can adjust the angle by moving the machine's
housing up and down by hand.
IMPORTANT
-
Only use the heater if the feet are properly attached.
-
Ensure that the power supply to the socket into which the heater is plugged is in
accordance with the rating plate on the heater and that the socket is earthed.
Publicidad
