Electrical Safety; Remaining Risks - hafele Dialock FT 120 Instrucciones De Funcionamiento

3. Safety

3.1 Electrical safety

3.2 Remaining risks

12
Open Time
The open time in the → latch bolt lock operation determines the time for which the locks (→ EFL 3)
are kept open after presenting an authorised user key. The opening period can be set
in one-second increments from 3-120 seconds.
Output Delay
After presenting an authorised user key, the locks (→ EFL 3) are only opened after the delay time
has elapsed. The delay time can ve set in the → latch bolt lock operation and in the operation with
→ dead bolt lock function. The time can be set in one-second increments from
1-10 seconds.
PS1 / PS 2
Power supply unit
The following basic rules must be followed in order to prevent the risk of life-threatening
electric shocks:
Basic safety instructions
> Do not carry the product by the cable.
> Check all delivered product components for damages prior to the installation/operation!
Never install damaged product components, but complain to the manufacturer.
> Also repeatedly check during the operation. Never operate the product if any wires
have been damaged.
> Never modify or replace plugs and cables.
> Do not omit any delivered parts. Adhere to the installation instructions.
> Do not install any parts which are not approved by the manufacturer.
> Never operate the product without the included power supply unit.
Electrical safety
> Do not operate product components and cables near hot surfaces, heat sources,
easily flammable materials or areas with direct sunlight.
> Never expose product components and cables to humidity and never operate these
near water, damp, aggressive or potentially explosive areas. Never handle the power plug
and socket with wet hands.
> When pulling the plug out of the socket, do not pull at the cable, but at the plug.
> An earthed safety socket installed according to national regulations must be available for
the electrical connection. The connection data of the socket must match
the connection data of the product (see Chapter "Technical Data"). The use of output
extenders or adapters is prohibited!
> Never open the housing of the product components.
> Verify that uninstructed persons (such as children, customers) do not have access to
the electrical system of the product.
> Do not jam, crush, bend or damage the cable (e.g. by drilling, cutting). Do not place cable
over sharp edges or corners. Keep the cable at a sufficient distance from movable or
rotating parts.
The product has been built in accordance with the latest state of technology and the recognised
technical safety regulations. Nevertheless, risks to persons or damages to the product or other
property can occur during installation and operation.
WARNING
Risks due to failures or faults in electromagnetically sensitive devices! The
electromagnetic radiation of the product can cause faults in sensitive parts
(e.g. in medical equipment). The functionality thereof will be adversely affected.
> Do not place product close to electromagnetically sensitive devices. Pay attention
to the safety instructions of the devices.
> If you have any doubts regarding compatibility, please contact the manufacturer.