Sirena LPL 600 Instrucciones De Instalacion Y Uso página 7

LPL 110/240V AC
EN
INSTALLATION AND USE INSTRUCTIONS
COMPONENTS
Switch
Motion
sensor
Connector
OPERATION
LPL 600 110/240V AC - LPL 900 110/240V AC
The lamp will turn on automatically when it is powered.
LPL 600 INT 110/240V AC - LPL 900 INT 110/240V AC
A er powering the LPL, simply press the switch to turn the lamp on/o .
LPL 600 SENSOR 110/240V AC - LPL 900 SENSOR 110/240V AC
Each time LPL is powered, it will turn on with a steady light for a few seconds to stabilize the sensor.
The lamp is equipped with a sensor that will turn on the LEDs when it detects movement.
It will automatically turn o 3 minutes a er the last movement detected.
POWER CONNECTION
To connect and disconnect the cables it is necessary to wire the male connector and insert it into the LPL as
shown in the figure.
SAFETY INSTRUCTIONS
INSTALLATION MUST BE CARRIED OUT BY SPECIALIZED PERSONNEL ONLY
Sirena SpA C.so Moncenisio, 5-10-12-14-16 10090 ROSTA (TO) | Italia
Tel. +39 011 95 68 555 Fax +39 011 95 67 928 www.sirena.it E-mail: info@sirena.it
05/2024 Ref. 10-060-2113-000