Publicidad
Idiomas disponibles
Idiomas disponibles
18 / EN
•
Generally, for di erent wall types, especially walls with bricks, perforated blocks, or blocks with limited
firmness, this mounting must be checked for safety. The wall mounting hooks must be able to support
three times the weight of the heater full of water.
•
Do not place objects under the water heater, to avoid damages.
FIG. 2
Before connecting the device, you must:
Make sure that the product characteristics (refer to the data on the label located on one side
•
of the heater) comply with the requirements for its correct operation.
This appliance must be installed according to the following indications regarding the
presence of:
Humidity: do not install the appliance in humid environments (without ventilation).
-
Ice: do not install the appliance in environments with a likelihood of temperatures dropping
-
to critical levels with a risk of ice formation.
Sun rays: do not expose the appliance directly to solar rays, not even through glass.
-
Dust/ fumes/ gases: do not install the appliance in notably aggressive environments, such
-
as those with acid fumes, dusts, or saturated gas.
Electric shock: do not install the appliance directly on power lines that are not protected
-
from voltage fluctuations.
Publicidad
