Calorex LEVARE 15 Instructivo De Instalación, Operación Y Mantenimiento página 24

24 / EN
IV. HEATER OPERATION
Before using your water heater, make sure you read and follow the instructions in this manual and all the
product labels.
WARNING! Make sure your heater is completely full of water before starting it; if you start your
heater without water, it will damage the electrical resistance (heating element), and will void the
warranty.
Turning the heater On/O .
The water heater is turned on and o with the regulator knob, and not by connecting or disconnecting the
equipment from the electrical power connection.The light indicator stays on only during the heating phase.
Regulating the operating temperature.
Temperature is regulated by way of the knob in models with a knob (see Fig. 6).
FIG. 6
IMPORTANT: force must be used when turning the knob to maximum temperature for the first
time.