Publicidad
Idiomas disponibles
Idiomas disponibles
1. Make sure fan is fully assembled and louvers are in place and locked before turning on.
2. Place the fan on a level, dry surface, noting the precautions security described above.
3. Connect the fan to a suitable electrical outlet (see technical specifications for details).
• Speed adjustment: Turn the speed selector to the desired setting. There are 4 configurations:
• 0 (Off)
• I (Low speed)
• II (Medium speed)
• III (High speed)
• Swing function: Press the oscillation switch down to start the oscillation. Pull up to stop
the swing.
• Height adjustment: To adjust the height of the fan, loosen the height adjustment screw
on the outer bar and push the adjustable telescopic bar up or down to the desired height.
Tighten the height adjustment screw to lock the fan in place. The height of the fan can be
adjusted from 90 to 120 cm.
CAUTION: The fan must be off when making this adjustment.
CAUTION: Always turn off and unplug the fan before doing any cleaning.
• Do not use strong detergents, chemical cleaners, or solvents as they may damage the sur-
face finish of components.
• Use a brush vacuum to clean the grates.
• Use a soft feather duster or cloth rag to dust all surfaces.
• To clean the blades, first remove the front grill and cover by unscrewing the small screws
around the edge of the rear grill.
• Clean all parts with a soft cloth dampened (not wet) with mild soapy water.
CAUTION: Make sure that no water enters the motor unit.
• Use a dry cloth to completely dry the blades and louvers before reassembling.
• Make sure the fan is fully assembled before turning it back on.
• If you do not plan to use the fan for long periods of time, it is recommended that you clean
and store (preferably in its original packaging) in a cool, dry place.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of waste
electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one
for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated
and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environ-
ment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the
product by the user involves application of the administrative sanctions according to the laws.
HOW TO USE
CLEANING AND MAINTENANCE
STORAGE
9
E NGLI SH
Publicidad
