5. GETTING STARTED
Basic Operations
System Menu
Tap [
] access system settings menu to select
the item to be adjusted.
Beep Tone
Language
Time/Date
Clock Mode
Voice Control
NOTE
For some applications, certain features could
be limited.
For more information, contact a Clarion
authorized dealer.
Parking Guide Adjust
Tap [
] access system settings menu to adjust
the Parking Guide Adjust.
If you select [ON] for [Parking Assist Guide], tap on
[Enter] access into to adjust the parking guidelines.
WARNING
Parking Guide can not be adjusted while driving.
Adjust the parking guidelines by selecting the mark.
Adjusting the position of the selected mark.
C
A
Make sure that
and
and that
and
are the same length.
C
D
NOTE
Rear camera must be connected to proceed
to the Parking Guide configuration.
Tap [
] to set all the marks to the initial
default position.
ON
English
Enter
12hr
ON
A
D
B
B
are horizontally parallel,
Default Volume
Tap [
] access system settings menu to
change the Default Volume Level.
The default volume level is 20.
Default volume
NOTE
The volume is over than the default level
20, When turn ACC/Power Off and Restart,
the volume will be default level 20.
The volume is less than the default level 20,
When turn ACC/Power Off and Restart, the
volume will be keep the current level.
SWC Learning
Tap [
] access system settings menu to
set the desired function in the Steering Remote
Controller.
Select the function you want the Steering
Remote to learning
Press and hold the same function button on
the Steering Wheel Remote until "Learn Ok"
is displayed.
Learn OK
To cancel or stop the current button learning,
tap on [
].
NOTE
SWC must be connected to use this function.
20
EN-5