Bosch GCA30-42K Instrucciones De Funcionamiento Y Seguridad página 16

Connection Established
— When the connection has been successfully established, the Status
Indicator with Auto-Start Symbol 2 on the Receiver 1 lights up green.
— The LED Status Indicator 6 on the Auto-Start Remote 5 will briefly flash
green.
Fig. 7
Battery Replacement
When changing the coin cell, the following shall apply:
— If the Auto-Start Remote 5 was connected to the Receiver 1 before chang-
ing the coin cell, the connection is automatically reestablished after
changing the coin cell.
— If the modules were not connected before replacing the coin cell, the
connection will need to be established.
After a reset, the Auto-Start Remote and the Receiver must be reconnected.
16
160992A8R3 GCA30-42K 202404.indd 16
1x
4/1/24 3:45 PM