Publicidad
Idiomas disponibles
Idiomas disponibles
Yellow
Red
Resetting to Factory Settings
— Receiver GCA30-42: Press and hold the Button 3 until the status indicator
with the Auto-Start Symbol 2 flashes blue four times in rapid succession.
— Auto-Start Remote GCT30-42: Press and hold the Start/Stop Button 7
until the LED Status Indicator 6 flashes blue four times in rapid succession.
Vibration Detection
The Auto-Start Remote 5 is equipped with vibration detection. Once the
utilized cordless tool is activated, the Auto-Start Remote 5 detects the vibra-
tions of the activated cordless tool and automatically switches on the dust
extractor.
— If the cordless tool is switched off, the dust extractor will switch off
automatically.
Note: After the tool is switched off, in order to empty the hose, the dust
extractor switches off 10-15 seconds later.
18
160992A8R3 GCA30-42K 202404.indd 18
– Coin cell nearly
discharged
– Connection not
established or
– Coin cell discharged
Change coin cell soon
– Restart the
connection attempt or
– Change the coin cell
4/1/24 3:45 PM
Publicidad
