Publicidad
Idiomas disponibles
Idiomas disponibles
Remove any visible dirt and debris using a brush or a damp cloth. Do not use
any detergents or solvents.
Coin Cell Replacement
any other coin cell type is utilized than what is recommended.
Removal of the Coin Cell
1. Open the Battery Compartment Cover 9 on the rear of the Auto-Start
Remote 5 with a coin or small flat head screwdriver by turning counter-
clockwise (Fig. 8). Once the Battery Compartment Cover is loose, re-
move the battery compartment cover from the Auto-Start Remote.
2. Carefully remove the older coin cell and insert the new coin cell into the
Auto-Start Remote 5 (Fig. 8). To ensure the new coin cell is correctly
inserted, follow the markings on the Auto-Start Remote carefully.
3. Once the new coin cell has been inserted correctly, reinstall the Battery
Compartment Cover 9 onto the rear of the Auto-Start Remote 5 and turn
the Battery Compartment Cover clockwise utilizing a coin or a small flat
head screwdriver until it can go no further (Fig. 8). This will ensure that
the Battery Compartment Cover is properly secure.
20
160992A8R3 GCA30-42K 202404.indd 20
Maintenance
The coin cell must always be replaced with a coin
cell of the same type. There is a risk of explosion if
The drained coin cell may leak and damage the
product or cause personal injury.
4/1/24 3:45 PM
Publicidad
