Publicidad
Idiomas disponibles
Idiomas disponibles
The alarm may light when you plug the
appliance for the first time.
Refer to the "Troubleshooting" chapter for
more possible causes of triggering the alarm,
and solutions on how to deactivate it.
4.7 Standby mode
Activate the Standby mode to switch off the
freezing function and therefore lower the
energy consumption of the appliance.
To activate the Standby mode:
1. Set the temperature for -16°C. Refer to
the "Temperature regulation" section.
2. Press and hold the temperature
regulation button until all temperature
indicators blink 3 times.
5. DAILY USE
5.1 Removing and installing the
door shelf
To remove the door shelf:
1. Hold the left side of the shelf.
2. Lift the right side of the shelf until it
comes free from the fastener.
3. Lift the left side of the shelf and remove it.
To put the shelf back in:
1. Place the shelf flat on the door.
2. Push two sides of the shelf downwards at
the same time so that the shelf fits both
fasteners.
10
ENGLISH
If you press the temperature regulation
button while the Standby mode is on, all
temperature indicators blink 3 times.
You can deactivate the Standby mode by
repeating the above procedure.
During the Standby mode, the
temperature inside the appliance may
rise above the set -16°C. If that happens
after the mode deactivates, the alarm
indicator lights and the sound is on.
When the appliance automatically lowers
the temperature, the alarm indicator and
the sound alarm deactivate.
5.2 Removing and installing the
freezer drawers
To remove a drawer from the freezer
compartment:
1. Open the freezer door completely.
2. Pull the drawer out until it stops.
3. Lift slightly the front of the drawer and
detach it from the appliance.
To put the drawer back into its initial
position, follow the above steps in
reverse order.
5.3 Temperature indicator
For proper storage of food the refrigerator is
equipped with the temperature indicator. The
Publicidad
