COMPANION 320.10831 Manual Del Operador página 10

Before each use inspect the circular saw, switch
and cordfor damage.Check for
damaged, missing, or wornparts. Check for loose screws, misetignmeetor binding of
movtng parts, or any othercondglonsthat may affect the operation. If abnormal
vibrationor noise occurs,turn the tool off immediatelyand have the problemcorrected
beforefurther use. Before cleaningor pedormingany mainlenance,the tool shouldbe
unpluggedfrom the powersupply.Using compressed air may be the mosteffective
cleanlogmethod. Adways wear safety goggleswhen cleaningtoolswilh compressed air.
A_ WARNING: Do not let brake fluids, gasoline, petroleumJoased products,
penetrating oiL, etc., come in contact with plastic parts.They contain chemicals
that can damage, weaken or destroy plastic,
WARNING: When servicing use only identical replacement parts. Use of
any other parts may create a hazard or cause product damage.
A_ WARNING: Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be suitable for one tool may
become hazardous when used on another tool.
A_ WARNING: Maintain tcols with care. Keep cutting tools sharp and clean.
Properly maintained tools wilh sharp cutting edges are less [ikely to bind and
are easier to control.
A_ WARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service techntdan.
A_ WARNING: Berne dust created by power sanding, sawing, gdnding, drilling,
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products,
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to Ihese chemicals: work in a well
vecttieted area, and work with approved safety equipment, such as those
dust masks that are specietly designed to filter out microscopic particles.
10