Publicidad
Idiomas disponibles
Idiomas disponibles
rl= _1_: 1:11._:111 =1tti
:lit ti:l.'r,!tSL
Do not use tool ff switch does not turn it on or off. Any tool that cannotbe
controlledwith the switch ls dangerousand must be repaired.
Disconnect the plug from the power source before making any ad|ustmenta,
changleg accessories, or storing the tool. Such preventivesafety measures reduce
the riskof startingthe tool accidenlail_
Store Idle tools out of reach of children and other untrained persons. Toolsare
dangerousIn the handsof untrainedusers.
Maintain tools with care. Keep cutting tools sharp and clean. Properlymaintained
tools,with sharp cuttingedges are less likelyto hindand are eaaier to control
Check for mleaitgnment or hlndtng of moving parts, breakage of parts, and any
other condition that may aft_'t the tool's operation. If damaged, have the tool
servleed before using. Many accidentsare caused by poorlymaintained tools.
Use only accesaorles that are recommended by the manufacturer for your
model. Accessories that may be suitablefo_one tool, may becomehazardous when
usedon another tool.
Do not aRer or misuse tool. These tools are precisionbuilt.Any aiteraticn or
modification not spedifiedis misuse and may result in a dangerouscondition.
I
A_
CAUTION:
Do not attempt to operate this tool until you have thoroughly
read all Instructions, safely rules and warnings. Failure to comply can resutt in fire
electric shock, or serious personal injury. Save the Owner's Manual and review
frequently for reference.
I
A_, WARNING:
When using power tools, basic safety precautions should
always be followed to reduce the risk of fire, dieotdc shod<, and personal injury.
Stay alert, watch whet you are doing and use common
sense when operating
a
power tool. Oo not use tool while Ifred or under the influence
of drags, alcohol,
or medication.
A moment of inattenlicn
while operafing
power tools may result in
serious personal Injury.
Dress properly.
Do not wear loose clothing
or Jewelry. Contain
long hair. Keep
your hair, cdothing, and gloves away from moving
parts. Loose clothes, jewelry, or
long hair can be caught in moving paris.
Avoid accidental
starting.
Be sure switch
is off before plugging
in. Carrying tools
with your finger on the switch or plugging in tools that have the switch on invites
accidents.
Do not overreach.
Keep proper footing
and balance
st all times. Proper footing
and balance enables better control of the tool in unexpected
situations.
Use safety equiprrmnL
Always wear eye protection.
Dust mask, non-skid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.
Before connecting
the toni to a power soume (receptacle, outlet, etc.), be sure
voltage supplied is the same as that specified on the nameplate
of the tool. A power
source with voltage greater than that specified for the tool can result in serious injury
to the user, as we{t as damage to the tool.
Publicidad
