Preparations
FM Antenna
•
For better FM stereo reception, connea an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
(C) Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", colored (marked) wire to
" + " and black (unmarked) wire to " —",
#
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
- For optimal sound performance, use the
supplied
speokers,
- Do
not connect more than one speaker to any
one pair
of +1 — speaker terminals.
- Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Optional connection
The optional equipment and connecting cords
are not supplied. Refer to the operating
instructions of the connected equipment for
details.
Connecting other equipment to your
system
Connect the audio left and right OUT terminals
of aTV,VCR, Laser Disc player DVD player or
CD Recorder to the
AUX IN
terminals.
Note:
- If you are connecting equipment with a mono
output (a single audio out terminal), connect
it to
the AUX IN left terminal. Alternatively, yoq tjan use
a "single to double" cinch cable (the output sound
still remain mono).
_ii_
Inserting batteries into the
remote control
Insert two batteries (not supplied) type R03 or
AAA into the remote control with the correct
polarity as indicated by the " +" and " —"
symbols inside the battery compartment,
CAUTION!
- Remove batteries if they are exhausted
or will not be used for a long time.
- Do not use old and new or different
types of batteries in combination.
- Batteries contain chemical substances, so
they should be disposed off properly.
11