Troubleshooting
RADIO RECEPTION
Radio reception is poor.
-
If the signal is too weak, adjust the antenna or
connect an external antenna for better reception.
-
Increase the distance between the Micro HiFi
System and yourTV orVCR,
TAPE OPERATION / RECORDING
Recording or playback cannot be made.
-
Clean deck parts, see "Maintenance",
-
Use only normal (lEC I) tape for recording.
-
Apply a piece of adhesive tape over the missing
tab space.
-it-
GENERAL
The system does not react when buttons
are pressed.
-
Remove and reconnect the AC power plug and
switch on the system again.
N.
)
Sound cannot be heard or is of poor
quality.
-
Adjust the volume,
-
Disconnect the headphones,
-
Check that the speakers are connected correctly.
-
Check if the stripped speaker ware is clamped.
The left and right sound outputs are
reversed.
-
Check the speaker connections and location.
The remote control does not function
properly.
-
Select the source (CD orTUNER, for example)
before pressing the function button (
►
,
N, W).
-
Reduce the distance between the remote control
and the system.
-
Insert the batteries with their polarities
(+/-
signs) aligned as indicated.
-
Replace the batteries.
-
Point the remote control directly toward
'
IR sensor on the front of the system.
The timer is not working.
-
Set the clock correctly
-
Press TIMER ON "OFF to switch on the timer
-
If a recording is in progress, stop the recording.
The Clock/Timer setting is erased.
-
Power has been interrupted or the power cord
has been disconnected. Reset the c!ocl</timer
21