Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
•
Press (!)
STANDBY ON
or
SELECT
SOURCE
The system will switch to the last selected
source.
•
press
CD, TUNER, TAPE
or
AUX
on the
remote control,
^ The system will switch to the selected source.
To switch the system to standby mode
•
Press (!)
STANDBY ON
on the system or
remote control.
•
If in tape mode or recording mode, press
STOP'OPEN
first,
-» The volume level, interactive sound settings,
last selected source and tuner presets will be
retained in the player's memory.
1
Adjusting volume and sound
Turn the
VOLUME
control counter-clockwise
to decrease or clockwise to increase volume on
the system (or press
VOL
— / + on the remote
control).
^ Display shows the volume level I'uL and a
number from 0-32.
2
Press
DSC
repeatedly to select the desired
sound effect: OPTIMAL (no Indication)/
ROCK (;^J) / JAZZ (j/ )/POP (^).
J
3
Press
DBB
to switch bass enhancement on or
off.
<
Display shows: iiliia if the DBB is activated.
4
Press
INCREDIBLE SURR. (IS
on t(ie
remote control) to switch the surround sound
effect on or off.
,
-> Display shows:
if activated.
Note:
«
-
The effect of INCREDIBLE SURROUND may
vary with different types of musk.
5
Press
MUTE
on the remote
control to interrupt sound
reproduction instantly.
^ Playback will continue
without sound and the display
shows mLITL.
•
To activate sound reproduction you can:
- press
MUTE
again;
- adjust the volume controls;
- change source.
Power-saving automatic standby
As a power-saving feature, the system
automatically switches to standby 15 minutes
after a tape or CD has reached the end and no
control is operated.
13
Publicidad
