Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications
AMPLIFIER
Output power. .2x5WRMS
.. low total power
Signal-to-noise ratio. .> 65 dBA (lEC)
Frequency response.40 - - 20000 Hz, + 3 dB
Input sensitivity AUX. .0.5 V (max. 2V)
impedance loudspeakers.
.8£i
Impedance headphones. .32 a-1000 £2
CD PLAYER
Frequency range. .20 - 20000 Hz
Signal to-noise ratio. .75 dBA
TUNER
FM wave range. .87.5-108 MHz
AM wave range'. .530-1700 kHz
Sensitivity at 75 £2
- mono, 26 dB signal-to-noise ratio.2,8 pV
- stereo, 46 dB signal-to-noise ratio.61.4 pV
Selectivity. .> 28 dB
Total harmonic distortion. .:.< 5%
Frequency response.63 - 12500 Hz (±3dB)
Signal-to-noise-ratio. .> 50 dBA
TAPE DECK
Frequency response
Normal tape (type I)... 120 - 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I). 48 dBA
Wow and flutter.^ 0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (wx h x d) .155 x 220 x 210 (mm)
. 6.10
X
8.66
X
8.26 (inch)
GENERAL INFORMATION
AC Power.120 V / 40 Hz
Dimensions (w x h x d) .. 140 x 223 x 253 (mm)
. 5.51
X
8.78
X
9.96 ^inch)
Weight (with/without speakers)..
.approx. 6.0 / 2.8 kg
...approx. 13.2 / 6.16 pound
Standby power consumption.< 3 W
«
Subject to modification
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.
Problem
Solution
CD OPERATION
"MH
IiTGlI"
is displayed.
-
Insert a disc.
-
Check if the disc is inserted upside down.
-
Wait until the moisture condensation at the lens
has cleared.
-
Replace or clean the disc, see "Maintenance".
-
Use a finalized CD-RW or CD-R.
20
Publicidad
