Quick operation guide
Diagram 4.6.1
A
B
Distance from the
load's center to the
axel of the tower
50 cm
A
(1.64')
55 cm
B
(1.80')
60 cm
C
(1.97')
65 cm
D
(2.13')
70 cm
E
(2.30')
Security system ALS / ILS
The TL-A300 incorporates the patented
security system ALS (Automatic Lock
Security). This VMB red trigger system
automatically blocks the tower in the po-
sition it is left in. Each section of lift has
an ALS that blocks the section in the un-
likely event of the cable breaking. For a
more complete security the lifting carriage
incorporates the ILS system (Inertial Lock
Security)
PRO LIFTS S.L.
C
D
E
Maximum load
TL-A300
300 kg
(662 lb)
272 kg
(600 lb)
250 kg
(551 lb)
230 kg
(507 lb)
182 kg
(400 lb)
Depósito legal y copyright 2014. Todos los derechos reservados.
ENGLISH
4.7 - Elevation:
Turn the winch crank clockwise (N
the carriage and profiles. The ALS sys-
tem enable the lift to rise and automati-
cally block the carriage and profiles whilst
rising ensuring that it will never fall. This
enables the cable to be without any force
and means it is only used for the elevation
and descent of the lift. The SRS (Sequen-
ce-Retainer-System) will also ensure that
the profiles rise in sequence, one after the
other.
4.8 - Hold:
The tower can be left in any intermediate
position if it is necessary. Just stop turning
the handle of the winch and gently turn it
in an anticlockwise direction (N
the last profile risen. The ALS lock will
take the pressure of the load and release
strain applied on the cable.
4.9 - Lowering:
To bring the lift down you need to first turn
the winch handle slightly clockwise (N
and at the same time pull the red ALS
lock (ALS-1) out. This releases the bloc-
king systems. Then turn the handle anti-
2
clockwise (N
), whilst maintaining the ALS
lock pulled out until the profile has been
completely lowered. All red ALS locks
(ALS-2, ALS-3 , ALS-4 & ALS-C) should
be pulled out one by one whilst the handle
is turned anti-clockwise (N
les are brought down, one by one.
1
) to lift
2
) to block
1
)
2
) and the profi-
10